+86 19963776827
(541) 754-3010

 In recent years, the country has vigorously developed new types of support. More and more factories and machinery manufacturers are introducing high-tech equipment. The use of laser engraving machines can improve our production efficiency and ensure quality. It can also improve product cost performance and save costs. If it is always a traditional machine, the work efficiency will be greatly reduced, the product quality will be greatly reduced, and it will not be able to meet the new technological transformation and upgrading. Compared with their peers, they will lag behind and are unwilling to pay high prices for new equipment. However, their competitors, their peers, may be willing to give up their money. Compared with them, they have fallen behind and are not competitive in the market. When cutting this piece, the laser engraving machine is a kind of high-tech cutting equipment, so should the factory introduce such cutting equipment?

  As we all know, the more highly skilled, efficient and new equipment, the higher the cost, but the efficiency is directly proportional to its value. Fiber laser cutting machine is one of the best cutting equipment, its cutting technology is also top-notch, but compared with other cutting equipment, its cost is relatively expensive. Some mechanical cutting, especially some hard and large cutting objects, often need to use this kind of efficient fiber laser engraving machine. For a mechanical cutting factory, the cost of introducing such a piece of equipment is naturally very high, and it is much more expensive than some traditional cutting equipment, but there are also reasons for its high cost. After all, quality can be guaranteed and efficiency improved.

   Cost comparison between fiber laser engraving machine and traditional machine

  If you want to carefully compare the cost of the laser engraving machine, it is often more obvious. If you use traditional cutting equipment, the efficiency is relatively low, the quality cannot be guaranteed, and more people are required to operate. Although the short-term cost is relatively low, the long-term cost is still relatively high. The introduction of the laser cutting machine has high efficiency and guaranteed quality. It can be operated by one or two people without too much manpower. In contrast, if traditional engraving machines and laser engraving machines continue for a long time, the cost of laser engraving machines will be lower and cost-effective

WWW.WATSON-CNC.COM whatsapp:0086 19963776827

In recent years, as people’s demand for custom-made home furniture has increased, there have been more and more furniture factories. As a necessary production equipment, cnc router machine is popular because of its superior processing ability and effective improvement of production efficiency. How to choose a cnc router machine that suits you? Today, I will analyze it from three aspects.

  1. Accurate positioning of cnc router machine according to business needs

  Because people nowadays are full of personalized creativity, they will have different processing requirements. Then you need to choose the woodworking engraving machine according to the main products you make. For example, if your main business is door panels, you can choose a floppy disk cutter changer. Because the door panels require more patterns, the 1325 linear ATC cnc router machine has 12 tools, and the tool change speed is fast. You can also increase the tool type according to your own needs. It can not only meet the needs of different customers, but also greatly Improve production efficiency.

  Of course, there are many different woodworking engraving machines, and different engraving machines correspond to different processing techniques. Be sure to purchase cnc router according to your own needs, and accurately locate and choose.

  Second, understand the manufacturer's strength on the spot

  The engraving machine industry has been developed for almost 19 years now. Now there are many wood cnc router manufacturers,

  It is said that you must shop around, but you must not take advantage of such large equipment. After understanding your own needs in the early stage, choose cnc router according to your own production needs. Next, you can go to the cnc router manufacturer to conduct on-site inspections to see the strength of the manufacturer. In addition, further understanding, whether the manufacturer has the strength to do software training, after-sales service, and technical guidance for you, only choose a strong manufacturer, so that you can sit back and relax in the later service.

1325 3 axis single head cnc router machine

  Three, test the accuracy and running speed of cnc router

  Watson cnc router from component processing, bed welding, to parts assembly, each step is related to the accuracy and running speed of the cnc router. This requires professional processing technology and meticulous measurement. If you want your own engraving products to be in the lead, you must strive for perfection in all aspects. There are also some main accessories of wood cnc router accuracy, such as drives, motors, guide rails, etc. We have to pay too much attention to these.

WWW.WATSON-CNC.COM whatsapp:0086 19963776827

Now, more and more like wood cnc router. Watson cnc router is very intelligent. The cnc wood milling machine makes the operation of workers more concise, and the business of customizing furniture becomes very easy. The threshold for furniture factories is getting lower and lower. Having a cnc wood milling machine with high configuration can save 5 manuals. Worker. . Watson cnc router uses professional optimized typesetting software to realize drilling, grooving, cutting, and special-shaped arc cutting, maximizing the utilization rate of the plate, saving labor and high efficiency. One person can operate multiple devices at the same time, and a Watson cnc router can feed 50-80 sheets in 8 hours. What kind of furniture? Buying the best cnc wood carving machine has become an indispensable tool and equipment.

1325 3 axis single head cnc router machine

How to ensure the safety of cnc router machine, smooth and accurate production is a problem that furniture factories consider every day.

Watson cnc router learns these 5 knowledge points:

1. Know the Watson cnc router operating system and master the operation steps

2. Tool compensation setting steps

3. Setting steps of workpiece origin (program origin)

4. Upload, load, delete and execute program steps of processing program

5. Operation steps of milling backing board (density board)

The commonly used operating systems of cnc wood router in the market include Taiwan New Generation, Taiwan Baoyuan, Shanghai Weihong...the operating systems have different expressions and interpretations of terms. It is very useful to master the core of the cnc wood router operating system.

Tool compensation is what we usually call tool calibration. Whether the cnc wood routerr tool calibration is correct will seriously affect the depth of the holes we add and the depth of the scratches on the backing board (density board). The depth of the holes affects whether the furniture is in place during installation. The more scratches on the backing board, it will indirectly affect the adsorption and positioning of the board, so the accuracy of Watson cnc router's positioning is also very important.

Whether the workpiece origin or program origin is set accurately in cnc wood router affects whether the punching hole is vertical or not, and the accuracy of the plate processing size.

How to import the program in the U disk? How to upload? How to delete and uninstall the programs in the upload system? For example, if the program in the new generation system cannot be deleted during the loading process, it must be uninstalled first, or loaded with another program before it can be deleted.

The flatness of the backing plate of Watson cnc router affects the firmness of the plate adsorption. The more grooves on the backing plate, the suction pressure will decrease, and the plate is easy to run off the board, so the flatness of the backing plate must be maintained.

1325 linear ATC cnc router machine

In addition to the above 5 knowledge points are very important, ordinary maintenance is also indispensable!

1. Check the water volume of the vacuum pump of the cnc router twice a day. Pay attention to the heat preservation of the pump head in winter and add an appropriate amount of antifreeze powder or antifreeze.

2. Check the oil volume of the automatic oil pump of Watson cnc router every day

3. Check the guide rack of cnc router every day to see if there is any foreign matter, sawdust, etc., to keep it clean

4. Clean up the cnc router electrical box to prevent excessive dust from causing electrostatic interference

WWW.WATSON-CNC.COM    whatsapp:0086 19963776827

In the engraving process of the woodworking engraving machine, the engraved objects are often misplaced, and we are often troubled to tell customers that their objects were damaged during the engraving process.
   Again, in order to avoid these problems, we explain the trick through the following operations:
  1. Check whether the pliers or chuck used for engraving is wrong? At the same time, the wear of the pliers or chuck of the woodworking engraving machine will also cause the dislocation of the engraved object. If the pliers or chuck is too tight, the carved object will be ejected at the moment when the cutter head touches the object to be carved.
  2. For those carved objects with irregular shapes, they appear to be tightly fixed on the surface, and they will shake back and forth when subjected to downward pressure. At this time, you can try to put some waste under the object to increase friction. The other is to keep the packaging that comes with the item. Although the object is irregularly shaped, the packaging it carries may be very regular and easy to be fixed. Add a small strap to make an irregularly shaped object. Easy to be fixed. Or try tools to fix the regular parts, and discard the irregular parts.

  1. If the downward pressure on the engraved object is large, consider whether you must use a tapered nose. If the engraving machine's diamond head moves too much during the engraving process, the pressure on the side of the tool will cause the engraved object Mobile. If an incorrect diamond knife is used, it can also cause the same problem. A 90 or 100 degree diamond knife will dig into the material, causing the material to move during the engraving process.
  2. Since woodworking engraving machines are often equipped with multifunctional pliers or chucks, and they are made of iron, it is easy to damage the engraved object or make it slip off during the engraving process, so choose some rubber caps or rubber tubes It is helpful to fix the object to be carved.
  3. For engraving plastic patterns, you can stick the transfer tape on the back of the engraved object, spray the side with the tape on the liquid spray glue, and then stick it on a surface that can be discarded, so that you can avoid the use of double-sided Glue, leaving a surface that is difficult to clean. Because the reposting tape is easy to peel and clean. Use a special engraved belt. One side of this belt is more viscous than the other, so the plate can be moved or changed at will.
Zhongrun Century Front, No. 12111, Jingshi Road, Lixia District, Jinan City, Shandong Province
+86 199 6377 6827
+86 199 6377 6827