watsoncncmachine@gmail.com 
+86 19963776827
(541) 754-3010

March 14, 2021

How to deal with the phenomenon of knife sticking in woodworking engraving machine

The woodworking engraving machine may encounter various things in the process of processing, among which the sticking of the knife is an accident. Engraving machine piercing means that the tool suddenly plunges into the workpiece during the movement, resulting in damage to the tool, scrapping of the workpiece, and even damage to the accuracy of the machine tool. Avoid piercing during processing.
 When the engraving machine is running and cutting the knife, press the emergency stop switch button on the machine tool immediately to terminate the current processing. Check whether the workpiece is scrapped, and then run-in the spindle for about 2 hours according to the spindle running-in procedure. If it is a relatively serious sticking of a larger tool, check whether the accuracy of the machine tool is damaged. If the accuracy is damaged, let the professional of the engraving machine manufacturer handle it.
The reasons for knife sticking are generally misoperation, processing program problems and machine tool failures. Therefore, each link should be checked during operation to avoid misoperations, and path over-cutting analysis should be carried out in path variants to avoid knife sticking. The path appears. At the same time, it is necessary to ensure the stability of the power supply environment of the CNC engraving machine and the stability of the control computer. These two are important reasons for machine failures.

Zhongrun Century Front, No. 12111, Jingshi Road, Lixia District, Jinan City, Shandong Province
+86 199 6377 6827
+86 199 6377 6827
watsoncncmachine@gmail.com