watsoncncmachine@gmail.com 
+86 19963776827
(541) 754-3010

December 6, 2021

Solve the problem of uneven depth of the knife during woodworking engraving machine processing

When woodworking engraving machines are processed in many factories, the craftsmanship is designed according to the drawings prepared in advance. For example, if the knife needs 0.5cm, the actual engraving depth is 0.5. But when there is a problem, when it is found that the value of 0.5 is 0.2 in some places, it even reaches 1 in some places. This is a headache. If you find a problem, if you want to solve the problem, you must first understand where the problem occurred. Generally, the uneven engraving of woodworking engraving machine occurs, and it is generally due to the following aspects except for the problems:

  1. The control card is loose or faulty

  2. Step-by-step motor failure

  3. Drive failure or current subdivision is inconsistent with the software setting

  4.Z-axis motor cable failure

  5. Spindle motor failure

  6. Inverter interference or data setting error

  7. Electrostatic interference

  8. Computer virus or system problem

  The woodworking engraving machine has this kind of failure, and the best solution is to troubleshoot it.

Zhongrun Century Front, No. 12111, Jingshi Road, Lixia District, Jinan City, Shandong Province
+86 199 6377 6827
+86 199 6377 6827
watsoncncmachine@gmail.com